PS-Evolution: Board - Einzelnen Beitrag anzeigen

psp-3004 · 03.09.2010, 16:52

Hier ist der kostenlose PS3 Hack namens PSGroove.
Ich habe ihn noch nicht ausprobiert, kann also perönlich nicht ganz bestätigen, dass er funktioniert.

Beschreibung:
PSGroove is an open source program for executing the "PSJailbreak" exploit, and injecting unsigned code into the lv2 gameos kernel during the PS3 boot process.

Download:

enthällt versteckten Inhalt

Du musst Dich bedanken um zu sehen was versteckt ist

Tutorial (auf Englisch)

Supported Hardware

AT90USB162
AT90USB646
AT90USB647
AT90USB1286
AT90USB1287
ATMEGA32U4

... and maybe more

Compiling

Linux

Prerequisites

avr-gcc

Under Gentoo:
emerge -av portage-utils crossdev
USE="-openmp" crossdev -t avr --without-headers
dfu-programmer (for installing)

Download here:

enthällt versteckten Inhalt

Cloning the repository

The repository uses the LUFA library as a submodule. To clone, use something like:
git clone git://github.com/psgroove/psgroove.git
cd psgroove
git submodule init
git submodule update
Configuring

Chip and board selection can usually be handled in the Makefile. In particular, update the MCU, BOARD, and F_CPU lines. Suggested values:
Teensy 1.0:

MCU = at90usb162
BOARD = TEENSY
F_CLOCK = 16000000

Teensy++ 1.0:

MCU = at90usb646
BOARD = TEENSY
F_CLOCK = 16000000

Teensy 2.0:

MCU = atmega32u4
BOARD = TEENSY
F_CLOCK = 16000000

Teensy++ 2.0:

MCU = at90usb1286
BOARD = TEENSY
F_CLOCK = 16000000

AT90USBKEY / AT90USBKEY2:

MCU = at90usb1287
BOARD = USBKEY
F_CLOCK = 8000000

AVROpendous v1.1:

MCU = at90usb162
BOARD = USER (need to manually attribute LED pins in Board/LEDs.h)
F_CLOCK = 8000000

Building

On Linux, use the AVR GCC toolchain (Debian/Ubuntu package: gcc-avr).
make clean
make
Programming

Now program psgroove.hex into your board and you're ready to go. For the AT90USBKEY and other chips with a DFU bootloader preinstalled, you can get the dfu-programmer tool, put your board in programming mode, and run
make dfu
For the Teensy boards, you probably have to use the [Teensy Loader](http://www.pjrc.com/teensy/loader.html) software.
Windows

WinAVR should do the trick.

OSX

Once the prerequisites are installed, this is pretty much the same as the Linux process listed above.
Prerequisites

Install the following to get started :
XCode - download from apple or install directly from an OSX DVD
MacPorts - BSD ports functionality on OSX
CrossPack AVR AVR toolchain for OSX

Open a new terminal window and enter the following:
sudo port install git-core dfu-programmer
Everything else

# get the source
git clone git://github.com/psgroove/psgroove.git
cd psgroove
git submodule init
git submodule update

# do the build
make clean
make

# put the board into programming mode
make dfu
Notes

MacPorts includes a portfile for the AVR toolchain, however, the included version of avr-gcc(4.0.2) does not support the AT90USB1287, it may be suitable for other boards.
Haven't tested the programming part yet, still waiting for a board to arrive.
Using

To use this exploit:

Hard power cycle your PS3 (using the switch in back, or unplug it)
Plug the dongle into your PS3.
Press the PS3 power button, followed quickly by the eject button.

After a few seconds, the first LED on your dongle should light up. After about 5 seconds, the second LED will light up (or the LED will just go off, if you only have one). This means the exploit worked! You can see the new "Install Package Files" menu option in the game menu.

Board-specific notes

Teensy boards only have one LED, so it will turn off when the exploit succeeds rather than turn green. Older Teensy 1.0 boards also have the polarity inverted. In general, a LED should do something when the board is powered, and do something different when the exploit works.
Backups

In order to load backups using PSGroove on the PS3 the source code needs a little patch as follows.

Edit the contents of the file descriptor.h (among the PSGroove source files)
Find the byte segment below and replace accordingly.

Find this:
0x78, 0x78, 0x78,
0x78
Replace with:
0x62, 0x64, 0x76,
0x64

If you prefer 'diff' output, here it is:
139,140c139,140
< 0x6f, 0x6f, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2f, 0x64, 0x65, 0x76,
0x5f, 0x78, 0x78, 0x78,
< 0x78, 0x00, 0x6d, 0x6f, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
---
> 0x6f, 0x6f, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2f, 0x64, 0x65, 0x76,
0x5f, 0x62, 0x64, 0x76,
> 0x64, 0x00, 0x6d, 0x6f, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,

03.09.2010, 16:52	#1 (permalink)
psp-3004 Newsposter Registriert seit: 02.02.2010 Alter: 14 Beiträge: 1.293	PSGroove PS3 Hack Hier ist der kostenlose PS3 Hack namens PSGroove. Ich habe ihn noch nicht ausprobiert, kann also perönlich nicht ganz bestätigen, dass er funktioniert. Beschreibung: PSGroove is an open source program for executing the "PSJailbreak" exploit, and injecting unsigned code into the lv2 gameos kernel during the PS3 boot process. Download: enthällt versteckten Inhalt Tutorial (auf Englisch) Supported Hardware AT90USB162 AT90USB646 AT90USB647 AT90USB1286 AT90USB1287 ATMEGA32U4 ... and maybe more Compiling Linux Prerequisites avr-gcc Under Gentoo: emerge -av portage-utils crossdev USE="-openmp" crossdev -t avr --without-headers dfu-programmer (for installing) Download here: enthällt versteckten Inhalt Cloning the repository The repository uses the LUFA library as a submodule. To clone, use something like: git clone git://github.com/psgroove/psgroove.git cd psgroove git submodule init git submodule update Configuring Chip and board selection can usually be handled in the Makefile. In particular, update the MCU, BOARD, and F_CPU lines. Suggested values: Teensy 1.0: MCU = at90usb162 BOARD = TEENSY F_CLOCK = 16000000 Teensy++ 1.0: MCU = at90usb646 BOARD = TEENSY F_CLOCK = 16000000 Teensy 2.0: MCU = atmega32u4 BOARD = TEENSY F_CLOCK = 16000000 Teensy++ 2.0: MCU = at90usb1286 BOARD = TEENSY F_CLOCK = 16000000 AT90USBKEY / AT90USBKEY2: MCU = at90usb1287 BOARD = USBKEY F_CLOCK = 8000000 AVROpendous v1.1: MCU = at90usb162 BOARD = USER (need to manually attribute LED pins in Board/LEDs.h) F_CLOCK = 8000000 Building On Linux, use the AVR GCC toolchain (Debian/Ubuntu package: gcc-avr). make clean make Programming Now program psgroove.hex into your board and you're ready to go. For the AT90USBKEY and other chips with a DFU bootloader preinstalled, you can get the dfu-programmer tool, put your board in programming mode, and run make dfu For the Teensy boards, you probably have to use the [Teensy Loader](http://www.pjrc.com/teensy/loader.html) software. Windows WinAVR should do the trick. OSX Once the prerequisites are installed, this is pretty much the same as the Linux process listed above. Prerequisites Install the following to get started : XCode - download from apple or install directly from an OSX DVD MacPorts - BSD ports functionality on OSX CrossPack AVR AVR toolchain for OSX Open a new terminal window and enter the following: sudo port install git-core dfu-programmer Everything else # get the source git clone git://github.com/psgroove/psgroove.git cd psgroove git submodule init git submodule update # do the build make clean make # put the board into programming mode make dfu Notes MacPorts includes a portfile for the AVR toolchain, however, the included version of avr-gcc(4.0.2) does not support the AT90USB1287, it may be suitable for other boards. Haven't tested the programming part yet, still waiting for a board to arrive. Using To use this exploit: Hard power cycle your PS3 (using the switch in back, or unplug it) Plug the dongle into your PS3. Press the PS3 power button, followed quickly by the eject button. After a few seconds, the first LED on your dongle should light up. After about 5 seconds, the second LED will light up (or the LED will just go off, if you only have one). This means the exploit worked! You can see the new "Install Package Files" menu option in the game menu. Board-specific notes Teensy boards only have one LED, so it will turn off when the exploit succeeds rather than turn green. Older Teensy 1.0 boards also have the polarity inverted. In general, a LED should do something when the board is powered, and do something different when the exploit works. Backups In order to load backups using PSGroove on the PS3 the source code needs a little patch as follows. Edit the contents of the file descriptor.h (among the PSGroove source files) Find the byte segment below and replace accordingly. Find this: 0x78, 0x78, 0x78, 0x78 Replace with: 0x62, 0x64, 0x76, 0x64 If you prefer 'diff' output, here it is: 139,140c139,140 < 0x6f, 0x6f, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2f, 0x64, 0x65, 0x76, 0x5f, 0x78, 0x78, 0x78, < 0x78, 0x00, 0x6d, 0x6f, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, --- > 0x6f, 0x6f, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2f, 0x64, 0x65, 0x76, 0x5f, 0x62, 0x64, 0x76, > 0x64, 0x00, 0x6d, 0x6f, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, Geändert von psp-3004 (03.09.2010 um 18:53 Uhr).